How to improve the working efficiency of well annealing furnace
Apr. 12, 2022
How to improve the working efficiency of well annealing furnace
The well type annealing furnace makes multiple locking rods embedded into the gap at the same time through the driving device, and then fixed through the locking parts to improve the sealing of the working chamber and improve the work efficiency. This way also saves the waste of energy.
The specific details of this way to improve the efficiency of the well type annealing furnace are as follows: a plurality of notches are set at the peripheral edge of the well type furnace cover, a plurality of locking rods are hinged on the furnace body for embedding into the notches respectively, and the threads of the locking rods are connected with locking parts for pressing against the furnace cover, It also includes a driving device with a driving ring arranged on the outer wall of the furnace and used to drive a plurality of locking rods to rotate at the same time and embedded into the notch.
Well annealing furnace is mainly used for annealing heat treatment of coiled wire rod, copper parts, stainless steel, steel strip and metal parts, so as to reduce oxidation, no decarburization and keep the workpiece clean after annealing.
When the locking rod is in a state for the locking part to fix the furnace cover, one side of the locking rod away from the furnace body collides with the inner wall of the drive ring. When the driving ring on the driving device rises along the outer wall of the furnace body, multiple locking rods are driven to rotate at the same time and embedded into the notch. At this time, the step of rotating the locking rods into the notch one by one is omitted. Only by rotating the locking part threaded on the locking rod, the furnace cover can be fixed, which is more convenient in operation and improves the installation efficiency.
