• Industry Pit Type Hardening and Tempering Furnace

  • Industry Pit Type Hardening and Tempering Furnace

Industry Pit Type Hardening and Tempering Furnace

Tips:We have Professional R&D engineer, Customized furnaces as your required is welcome.


Industry Pit Type Hardening and Tempering Furnace


Brief Introduction:

This series pit type tempering furnace is cycle type furnace, the main purpose for a variety of metal parts, plate material and shaft parts after carburizing and quenching for relative seal cavity with high temperature and low temperature tempering, ageing heat treatment.


Characteristic:

1). Rational structure, uniform furnace temperature, small upper & lower temperature difference in working zone, especially applicable for heating and heat treatment for long axial workpiece.

2). Adopt energy-saving furnace lining, fast temperature rise, low empty furnace consumption, save more than 20% of energy compare with old product.

3). The control system can be equipped with normal control instrument or instrument with micro-processor program control according to actual need.

4). When needed during process, protective atmosphere can be fed into the furnace to realize little-oxidizing heating.

5). Each product is installed with safety interlock and over-temperature device to provide reliable and safe operation and use.


Pit Type Tempering Furnace Drawing:

Industry Pit Type Hardening and Tempering Furnace

Industry Pit Type Hardening and Tempering Furnace

A variety of metal parts, plate material and shaft parts, etc...